ERT SpiroSphere Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 136

ERT SpiroSphere Скачать руководство пользователя страница 106

SpiroSphere

®

ECG Instructions for Use

Page 106/136

Version 02.02 • 04AUG2022

The following applies to products that are potentially contaminated by biological working substan-
ces of risk group 3 and 2 according to the regulation on biological substances and that are thus
classi ed as Transport Category B:
Please contact ERT

before

returning the goods and observe the regulations for the transport of

dangerous goods.

2. Cleaning

If the products had contact with biological working substances (for example blood or other body

uids), they have to be cleaned and disinfected in a combined cleaning and disinfection procedu-

re, unless a differing agreement has been made with ERT.
As a rule, the products also have to be cleaned in order to minimize adhesions and bacterial
contamination. Unless body uids, tissue or contrast agents etc. have caused the product to be
defective, deposits and adhesions should be removed carefully without damaging or altering the
product, if possible. For this, refer to the notes on the preparation of products.
Products which have been contaminated by highly active pharmaceuticals have to be cleaned
appropriately with tap water.

3. Disinfection/Sterilization

After cleaning, the products have to be disinfected and/or sterilized (only if
permitted for this medical product) in order to avoid harm to your and our
employees.
If in doubt or in case of suspected material incompatibility, please consult ERT.

4. Packaging

To avoid any contamination, the cleaned and disinfected product has to be packed as follows:
a) Put it into a sealable primary packing.

b) Put the primary packing in a waterproof secondary packing (if possible use hard packing
material).
c) Pack the secondary packing with a neutral packing material.

For “

Packaging and labeling of non

contaminated products

“: see point 6.

If in doubt, contact ERT for guidance on further actions!

Parts with sharp edges need to be packed particularly safe.

«
...
104
105
106
107
108
...
»

Содержание SpiroSphere









































































































































Отзывы:

Нет отзывов