ERT SpiroSphere Скачать руководство пользователя страница 114 | Manualshive

Страница: 114 / 136

ERT SpiroSphere Скачать руководство пользователя страница 114

SpiroSphere

®

ECG Instructions for Use

Page 114/136

Version 02.02 • 04AUG2022

Safety Precautions ECG

Read these instructions for use carefully. They are part of the device and must be available at all
times. Do only use the device for the intended purpose described in this document (see chapter
“Indications for Use“). If you recognize or experience any serious incident that has occurred in
relation to the device, you should report this to the manufacturer and the competent authority of
your country.
For your own safety as well as for the safety of your patients and according to the requirements of
the FDA and Medical Devices Act, please observe the following:

General Cautions and Warnings

CAUTION: Federal law (USA) restricts this device to sale by or on the order of a
physician.

The medical device is only to be used by people who can guarantee proper operation
based on their training or their knowledge, e. g. as a result of a training.

Any claim to guarantee and liability expires if other than the equipment recommended
in this instruction for use or original spare parts are used. Functional failure or
non-biocom-patibility can result, if other than original or recommended parts and
equipment is used.

The medical device is not suitable for use in aircraft or moving vehicles.

User must comply with the instructions given in this manual for avoiding infections
and bacterial contaminations.

Repairs must only be performed by the manufacturer or by factory trained personnel.

Carry out a visual control of device, cables and the other equipment/accessories
before each use. Do not use the device if obvious external damage or a failure of the
self test is identi ed.

Comply with the environmental conditions described in the technical data.

Only use biocompatible and FDA or CE-certi ed electrodes, as applicable, with the
medical device.

Comply with the instructions for use of the applied electrodes at all times.

Do not submerge the medical device into liquids, pour or splash it with liquids
deliberately or expose it to rain. Should liquids penetrate into the device, do not
operate it before a check of the customer support has been carried out.

Do a functional check regularly.

The medical device, other than the battery compartment, must only to be opened by
factory authorized personnel. Opening the device by an unauthorized person will void
all warranties.

The manufacturer is not liable for the function of the medical device if the device is
improperly maintained by the owner or the operator or if it is operated in a way that
does not correspond with the intended use according to these instructions of use.

«
...
112
113
114
115
116
...
»

Содержание SpiroSphere









































































































































Отзывы:

Нет отзывов