ERT SpiroSphere Скачать руководство пользователя страница 116 | Manualshive

Страница: 116 / 136

ERT SpiroSphere Скачать руководство пользователя страница 116

SpiroSphere

®

ECG Instructions for Use

Page 116/136

Version 02.02 • 04AUG2022

Motion artefacts adulterate the measurements. They might result in an incorrect
interpretation by the operator and, as a consequence, lead to a wrong or delayed
therapy.

When wearing other electronic devices, e. g. pacemakers, other implanted or body-
worn devices, errors or mutual interaction might possibly occur. Pacemaker patients
have to be monitored separately.

Magnetic and electric elds can in uence the function of the device. Keep a safe
distance between the medical device and devices emitting HF radiation (e. g. mobile
phones) as otherwise failures might occur (see chapter “Technical Data“).

Portable RF communications equipment (including peripherals such as antenna
cables and external antennas) should be used no closer than 30 cm (12 inches)
to any part of the medical device including cables. Otherwise, degradation of the
performance of this equipment could result.

Note that when using the device the electromagnetic radiation emitted might
in uence other electric devices in the vicinity.

Use of accessories, transducers and cables other than those speci ed or provided by
the manufacturer could result in an increased electromagnetic emission or decreased
electromagnetic immunity of the medical device and result in improper operation.

The medical device must not be operated in potentially explosive atmosphere.

Check the settings of the signal strength before each use.

When using the medical device, it is necessary to place the patient under constant
monitoring.

The medical device must not be used on children < 20 kg, infants and new-born.

The medical device must not be used unattended on children younger than 4 years
and disturbed patients. There is a danger of an aspiration of the electrodes.

When operating heat therapy devices nearby disruptions from the radio transmission
might arise.

When wearing pacemakers, errors in the determination of the heart rate might
possibly occur.

A short circuits of the battery circuit can overheat the medical device. If the device
feels warm, put it down immediately and remove the battery of energy. Do not use the
medical device until it has been serviced by a factory trained represetative.

Assure that the Bluetooth monitor which receives the measured data is paired to only
the medical device to prevent loss of monitoring.

ECG cables may wrapp around patients neck during sleep. So do not sleep with the
device attached or x the ECG cable close to the body.

Do not change the battery while the medical device is connected to a patient.

«
...
114
115
116
117
118
...
»

Содержание SpiroSphere









































































































































Отзывы:

Нет отзывов