ERT SpiroSphere Скачать руководство пользователя страница 119 | Manualshive

Страница: 119 / 136

ERT SpiroSphere Скачать руководство пользователя страница 119

SpiroSphere

®

ECG Instructions for Use

Page 119/136

Version 02.02 • 04AUG2022

Parts of the software are developed under the GPL software license. The source code of these
parts can be obtained from

ERT.

The conditions and a copy of the GPL can be obtained at: "http://www.fsf.org/licenses/gpl.html" or
from: Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
This product is based in part on Evas, Copyright

©

2000 - 2005 by Carsten Haitzler and various

contributors, and on the work of the FreeType team.

Safety Precautions for Lithium Ion Rechargeable Batteries

The SpiroSphere Sensor is powered by an internal Lithium-Ion Polymer battery.
The SpiroSphere Main Unit can also be powered by an internal Litihium-Ion Polymer battery.

The following safety precautions are valid for Lithium-Ion batteries:
-   Dispose of Lithium-Ion batteries according to local regulations.
-   Do not shortcut the battery.
-   Protect the battery against excessive heat!
-   Protect the battery against direct sun light!
-

Protect the battery against re!

-

Do not dismantle or manipulate the battery.

- Do not replace the battery. Improper replacement can lead to re, excessive heat or explosion.
- The uid in the battery is toxic and ammable - leaky batteries or batteries with dents must not

be used any longer!

- Do not come in contact with the uid in the battery. If the uid comes in contact with your skin,

immediately rinse the affected part with water and contact a doctor!

- To charge the SpiroSphere Sensor, use only the Main Unit Cradle and observe the instructions

in the manual!

- To charge the Main Unit, use only the provided power supply.

The safety precautions and operational procedures indicated in this chapter refer to
Germany. Different regulations and standards may apply to other countries.

«
...
117
118
119
120
121
...
»

Содержание SpiroSphere









































































































































Отзывы:

Нет отзывов