ERT SpiroSphere Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 136

ERT SpiroSphere Скачать руководство пользователя страница 107

SpiroSphere

®

ECG Instructions for Use

Page 107/136

Version 02.02 • 04AUG2022

5. Labeling

If a concrete risk of infection (e.g. HIV, Hepatitis B or C) is known to be present, this risk has to be
noted on the packing of the returned goods and/or in the accompanying documents.
For “

Packaging and labeling of non

contaminated products

“: see point 6.

6. Packaging and labeling of non

contaminated products

If the procedures described under point 2 and 3 are not applied, the contaminated product has
to be returned in a combined packing complying with the packaging instruction P 650 ADR after
contacting ERT, if necessary. Proceed as follows:

7. Dispatch

Please note that non-decontaminated returns with suspected pathogens of risk group 3 are
excluded from mailing. Diagnostic or clinical samples of UN no. 3373 which have been packed ac-
cording to packing instruction P 650 are not subject to any further regulations on the transportation
of dangerous goods and may be transported by a forwarding agent or a parcel service.
For this purpose use the accompanying shipping documents of the forwarding agent/carrier
containing the corresponding valid transportation regulations, e.g. GGVSE (Road and Railway
Dangerous Goods Regulation).
The product is then dispatched to the address indicated by the manufacturer.

Address:

eResearchTechnology GmbH

Sieboldstrasse 3
97230 Estenfeld, Germany
Tel: +49 9305 720-9891
www.ert.com

a) Put the product into a liquid-tight, sealable packing (e.g. tearproof plastic bag)

(primary packing)

b) Put the primary packing into a (if possible, liquid-tight) protective packing (secon-

dary packing); for liquid materials insert an adequate amount of absorbing material
between the primary and the secondary packing.

c) Pack the secondary packing with an additional outer packaging (padded envelope

or cardboard box).

d) Label the outer packaging with the corresponding UN no. 3373 for diagnostic or

clinical samples and add the note:

“

Biologischer Stoff, Kategorie B/Biological Substance,

Category

B

“

«
...
105
106
107
108
109
...
»

Содержание SpiroSphere









































































































































Отзывы:

Нет отзывов