ERT SpiroSphere Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 136

ERT SpiroSphere Скачать руководство пользователя страница 112

SpiroSphere

®

ECG Instructions for Use

Page 112/136

Version 02.02 • 04AUG2022

Cleaning and Hygiene

Prior to every application, all parts which come in contact with the patient and
which are intended for reuse must be cleaned or disinfected (unless otherwise
instructed).
Prior to taking measurements of a patient, his/her medical history is to be
checked in order to avoid a contamination of the device and a resulting cross-
contamination of the next patient.
While performing a calibration check, a new disposable Pneumotach must be
used to prevent cross-contamination between the calibration syringe and the
parts. This will prevent contamination of the syringe and allow for its reuse.
Always be sure to disconnect the devices/systems from the mains power before
cleaning or disinfecting. The Main Unit corresponds to protection class IP21, the
SpiroSphere Sensor to class IP20.
The device may not be soaked in liquid of any kind. Liquid inside the device/
system may lead to harm of the user and can destroy the device.
The device can be cleaned with a damp (but not soaked) cloth, which does not
produce lint. More detailed information can be found under “Hygiene“ in this
Instructions for Use.
Detergents and chemicals required for cleaning and disinfection must always be
stored in specially marked containers to prevent any accidental improper use.

Biocompatibility

Component

Material

Mouth piece

Styrolution PS 454N HIPS

Housing parts of the sensor unit and
the main unit

Cycoloy CX2244ME

PT-tube

Styrolution PS 454N HIPS

«
...
110
111
112
113
114
...
»

Содержание SpiroSphere









































































































































Отзывы:

Нет отзывов