manualshive.com logo in svg

ERT SpiroSphere, Инструкция по эксплуатации, Страница: 13 / 136

Поделиться
Скачать
ERT SpiroSphere Скачать руководство пользователя страница 13

SpiroSphere

®

 ECG Instructions for Use

Page 13/136

Version 02.02 • 04AUG2022

Problem

Troubleshooting

SpiroSphere Main Unit 
does not start

SpiroSphere Main Unit is not switched on. Try to switch on with the 
power button (press the button for at least 3 seconds).

Power supply is not connected and the battery discharged. Connect 
the power supply and let the SpiroSphere Main Unit charge for a 
few minutes.

SpiroSphere Main Unit is in standby mode. Use the touch screen or 
power button to wake up.

SpiroSphere Sensor does 
not start

SpiroSphere Sensor is not switched on. Press the power button for 
at least 3 seconds to switch the SpiroSphere Sensor on.

Battery is discharged. Place the SpiroSphere Sensor in the 
charging cradle for at least 10 minutes, then try again.

SpiroSphere Main Unit 
LED is blinking orange

Battery is discharged. Connect power supply immediately.

SpiroSphere Sensor 
orange LED is blinking 
slowly

Battery is discharged. Place SpiroSphere Sensor in charging cradle 
of the SpiroSphere Main Unit.

SpiroSphere Sensor LED 
is off while in the charging 
cradle

SpiroSphere Sensor is in sleep mode. Remove from the cradle and 
insert again.

SpiroSphere Sensor might be fully charged or off.Try to identify 
the SpiroSphere Sensor in the Spirometry Settings. Place the 
SpiroSphere Sensor again in the charging cradle.

SpiroSphere Sensor can't 
be paired

SpiroSphere Sensor is powered off. Switch on SpiroSphere Sensor 
(see above)

SpiroSphere Sensor is not in the pairing mode. Remove the 
SpiroSphere Sensor from the charging cradle if already inserted 
and then insert the SpiroSphere Sensor in the charging cradle. 
SpiroSphere Sensor is now in pairing mode for 90 seconds.

Connection to the 
SpiroSphere Sensor is 
not possible

SpiroSphere Sensor is off. Power on SpiroSphere Sensor (see 
above).

SpiroSphere Sensor is out of range. Check that the SpiroSphere 
Sensor is in the range (10m in the line of sight).

Calibration Check or 
Linearity Check not 
successful

Check if the calibration pump has the correct volume setting.

Check if ERT PT is inserted correctly.

ERT PT has been used – replace by a new ERT PT

SpiroSphere Main Unit is 
not responding

Touch the Home icon (top left).

Restart the SpiroSphere Main Unit by pressing the Power button for 
3 seconds – Shutdown Menu – use restart.

Press the power button for more than 8 seconds to switch off the 
SpiroSphere Main Unit.
Then restart by pressing the power button for min 3 seconds.

Troubleshooting

Содержание SpiroSphere









































































































































Отзывы:

Нет отзывов