manualshive.com logo in svg

ERT SpiroSphere, Инструкция по эксплуатации, Страница: 120 / 136

Поделиться
Скачать
ERT SpiroSphere Скачать руководство пользователя страница 120

SpiroSphere

®

 ECG Instructions for Use

Page 120/136

 

Version 02.02 • 04AUG2022

Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject 
to the following two conditions: (1) this device may not cause interference, and (2) this device must 
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio 
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil 
ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage 
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
SpiroSphere - Main Unit: 

IC:  11335A-SPS001 (for optional 3G module included) 

 

 

11335A-SPS003 (MOD MU-SPS003) (for optional 3G module  

  

excluded)

SpiroSphere - Sensor Unit: 

IC: 11335A-SPS002

Exposure to radio frequency energy.

 

The radiated output power of this device meets the limits of FCC/IC radio frequency exposure 
limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) 
between the equipment and a person’s body.

USA 

“This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received, including that may cause undesired operation.“
SpiroSphere - Main Unit: 

FCC-ID:   2AAUFSPS001 (for optional 3G module included) 

 

 

2AAUFSPS003 (for optional 3G module excluded)

SpiroSphere - Sensor Unit: 

FCC-ID:   2AAUFSPS002 

FCC Notice "Declaration of Conformity Information"

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
it may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is  

 connected.
• 

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modi cations not expressly approved by ERT could void the user's 
authority to operate the equipment.

Содержание SpiroSphere









































































































































Отзывы:

Нет отзывов