ERT SpiroSphere Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 136

ERT SpiroSphere Скачать руководство пользователя страница 100

SpiroSphere

®

ECG Instructions for Use

Page 100/136

Version 02.02 • 04AUG2022

If the patient's history shows a dangerous infectious disease
(e.g. tuberculosis), all parts which had been in direct or indirect contact
with the patients must be disinfected.

Precleaning and Disinfection

A thorough pretreatment/cleaning is a precondition for an ef cient disinfection of contaminated
parts. Protein residue on these parts might prevent an effective disinfection.

ERT

recommends the following disinfectants:

Precleaning and Disinfection:

Product

Manufacturer

Concentration/Reaction time

mikrozid

®

sensitive

wipes

Schuelke & Mayr GmbH

1 minute

CaviWipes

Metrex

1 minute

Procedure: Use the rst cleaning wipe to cover all surfaces with the detergent. Repeat the
procedure with a second wipe for disinfection. Let the surface dry.

Do not clean or disinfect the Main Unit or the SpiroSphere Sensor while
the devices are in operation.

Avoid

À

uid (eg. detergent) getting in contact with the connector inside of the

guiding tube of the sensor unit.

Protein residue on parts which are to be disinfected prevents effective disinfection.
Therefore all protein residue must be removed prior to disinfection. In case of
persistent residues please use an appropriate tool (e.g. soft brush) to remove the
residues.

Please observe the instructions with regard to concentration and reaction time!

If a different substance is used, please follow the manufacturer's instructions.

The use of detergents and disinfectants which have not been recommended by the
manufacturer might damage the products.

Wiping
disinfection

The surface disinfection of the

Main unit

and other

contaminated surfaces, such as the

SpiroSphere Sensor

,

must be performed on a regular basis (e.g. Main Unit daily).
If there has been direct contact with the skin or if the
case history/diagnosis of the patient requires it, a surface
disinfection has to be performed directly after the application.

Surface Cleaning and Disinfection

«
...
98
99
100
101
102
...
»

Содержание SpiroSphere









































































































































Отзывы:

Нет отзывов