ERT SpiroSphere Скачать руководство пользователя страница 108

Страница: 108 / 136

SpiroSphere

ECG Instructions for Use

Page 108/136

Version 02.02 • 04AUG2022

This certificate must be attached to ANY product complaint, ANY return of
medical products and accessories, ANY repair order and ANY return of studies.

Name of product:

REF (ERT item no.):

LOT (batch no.):

It is herewith confirmed by signature that (please mark appropriate box):

the enclosed medical product had

contact with blood or other body fluids so

that it is

hygienically safe

the enclosed medical product had contact with blood or other body fluids during its
use. The product has been cleaned and decontaminated as follows:

Disinfection by wiping all accessible surfaces with
Disinfectant:
Concentration:
Reaction time:

Other procedure (please indicate):

Steam sterilization (3 minutes at 134 °C or 15 minutes at 121 °C)

the enclosed medical product could

not

be decontaminated.

Reason:

'IVXMJMGEXISJ,]KMIRI

Send returns to the following address:

I6IWIEVGL8IGQF,

Abteilung Wareneingang
Sieboldstrasse 3
97230 Estenfeld
Germany

Sender's signature and address:

Содержание SpiroSphere









































































































































Результаты поиска

Содержание SpiroSphere

Отзывы:

ERT SpiroSphere, Инструкция по эксплуатации, Страница: 108 / 136

Результаты поиска

Содержание SpiroSphere

Отзывы: