manualshive.com logo in svg

Epson Equity 386/25, Руководство пользователя, Страница: 239 / 326

Поделиться
Скачать
Epson Equity 386/25 Скачать руководство пользователя страница 239

Option 

1, 

Format

If you select

1 -Format 

from the Hard Disk Format Menu,

you see the following (for a disk that does not have a defective

track table):

Format Hard Disk

< Drive 1: >

Scan hard disk to get defective track

information

? (Y/N)

(If the disk already has a defective track table, you do not see

the message because the disk does not need to be scanned for
bad tracks.)

Select Y to scan the disk or N to skip the scanning process.

If you select Y, the program scans the disk and displays these
messages during the process:

Scanning for flagged bad tracks...

Head 

: nnn

Cylinder 

: nnnnn

You see the head and cylinder numbers decrease as the program
progresses. After scanning the disk, the program displays the
results, such as the following:

Scanning 

finished.

Next you see the following prompt:

Accept recommended skewed sectors in

format

: 1 ? (Y/N)

Physically Formatting a Hard Disk

C-5

Содержание Equity 386/25







































































































































































































































































































































Отзывы:

Нет отзывов