manualshive.com logo in svg

Epson Equity 386/25, Руководство пользователя, Страница: 134 / 326

Поделиться
Скачать
Epson Equity 386/25 Скачать руководство пользователя страница 134

If you install it yourself, be sure to read the manual that came
with your math coprocessor, if you received one. Then follow
the steps in this section to install it in your computer. However,
be sure to read all of the warnings and instructions carefully so
you do not injure yourself or damage the coprocessor or your
computer.

Caution

To avoid generating static electricity and damaging your
math coprocessor, remain stationary as you install it.

These instructions describe how to install the Intel 80387 math

coprocessor. To install the Weitek 3167 or the dual-coprocessor
adapter, see the documentation that came with your equipment.

Carefully follow these steps to install a math coprocessor:

1.

Remove the computer’s cover. See page 5-2 for instructions.

2.

Remove the math coprocessor from its package and set it

aside.

3.

Turn the computer so the front panel is facing you.

5-26

Installing and Removing Options

Содержание Equity 386/25







































































































































































































































































































































Отзывы:

Нет отзывов