AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a NetWare Server
31
Connecting ac Power to an AX100SC Storage System
When powerup is complete (usually in 5-6 minutes), the SP
Boot/Fault light goes off. If the storage system does not power up
within several minutes, refer to the "Troubleshoot" section on the
AX100 support website or the
AX100-Series Documentation
CD.
Figure 12
AX100SC Storage-System Lights (LEDs)
If the amber System Fault light is on after powerup, a fault exists
somewhere in the storage system. If the amber light specific to a
power supply, SP, or disk is on, then that part is faulted.
CAUTION
!
Press the power button only briefly to power up the storage system.
Pressing the power button for more than four seconds while the
storage system powers up may affect initialization parameters.
Fault
Disk Activity
EMC2934
Power
Front Lights
FE 0
FE 1
Power
SP A Boot/Fault
Power Supply A Fault
EMC2955
SP A
Rear Lights
