AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a NetWare Server
45
Initializing the Storage System
Run the Navisphere Storage System Initialization Utility on a NetWare Host
1. Before continuing, make sure that the storage system is powered
up completely:
• The
Fault lights on each SP must be off and the Power light
must be on. These lights are on the back of the storage system
(Figure 18).
• The amber system Fault light visible from the front of the
storage system must be off (Figure 18).
Figure 18
S
torage-System Lights (LEDs)
2. At a NetWare console prompt, log in as admin or a user with
administrative privileges.
3. Start the Navisphere Storage System Initialization Utility:
LOAD SYS:\EMC\NAVIINIT\NAVIINIT
FE 0
FE 1
FE 0
FE 1
Power
SP A Boot/Fault
Power Supply A Fault
Power Supply B Fault
SP B Boot/Fault
EMC2928d
SP B
SP A
Rear Lights (AX100)
Fault
Disk Activity
EMC2934
Power
Front Lights