AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a NetWare Server
39
Initializing the Storage System
Initializing the Storage System
Read this section if you are installing a
new
storage system.
After the storage system is fully powered up for the first time, you
need to use the Navisphere Storage System Initialization Utility to
initialize it. Initialization sets network parameters for storage-system
management and/or creates a management user account for the
storage system so you can manage it over the LAN.
You install the Navisphere Storage System Initialization Utility on either a
NetWare client or the NetWare host.
Before You Start
To complete this procedure, you need
❑
The completed configuration planning worksheets from
Planning
Your AX100-Series Fibre Channel Storage-System Configuration
in the
"Plan" section on the AX100 support website or the
AX100-Series
Documentation
CD.
❑
The storage-system serial number located on a label on the back
of the chassis (see below).
❑
A static IP address for each storage processor in the storage
system (example, http://123.45.6.7).
❑
The subnet mask of the LAN to which the storage system is
connected.
❑
The default gateway address of the LAN to which the storage
system is connected.
HW
S
/N XXX 000NNNNNNNN
EMC
3
0
3
0
