44
AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a NetWare Server
Initializing the Storage System
4. From a NetWare client command prompt, change the directory to
the
\NETWARE\NAVIINIT
directory on the drive containing
the CD.
For example:
CD D: \NETWARE\NAVIINIT
5. From a NetWare client command prompt, enter
INSTALL
drive
where
drive
is the remote drive corresponding to the
SYS
volume
on the NetWare server. (For example,
INSTALL H:
would cause
the installation script to create the
H:\EMC\NAVIINIT
directory
with all the subdirectories required for the Navisphere Storage
System Initialization Utility.)
6. If DNS is functioning, verify that the IP addresses and names of
your DNS servers are registered in the
SYS:\ETC\RESOLV.CFG
file.
If they are not registered, edit
RESOLV.CFG
to add the
information.
7. On the NetWare server, verify that the
SYS:\ETC\HOSTS
contains an entry for the server itself, even if you will use DNS.
For example, if the IP address is
10.0.0.1
and the server name is
server1
, add
10.0.0.1 server1
to the NetWare server’s
SYS:\ETC\HOSTS
file. The host entry
server1
identifies the host
and will appear as the visible entry when you assign virtual disks
to the server.
