AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a NetWare Server
49
Connecting the Storage System to the Server
To Reset the Storage System
1. After shutting down the storage system, wait about two minutes
for the storage system to power down.
2. Press the power button and hold it down for one second
after
the
green Power light comes on (Figure 20) - a total of about four to
five seconds.
Figure 20
Storage-System Power Button and Light (LED)
Connecting the Storage System to the Server
Read this section for all configurations.
Use optical cables to connect storage-system fibre ports (labeled FE 0
and FE 1 on each SP) to server HBA ports.
Before You Start
To complete this procedure, you need an optical cable for each SP
port you will use on the storage system. For cable specifications, refer
to
Technical Specifications
in the "Technical descriptions" section on the
AX100 support website.
FE 0
FE 1
FE 0
FE 1
Power LED
EMC2928e
SP B
SP A
Power On/Off Button
Rear (AX100)
