46
AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a NetWare Server
Initializing the Storage System
4. Read the license agreement and enter
y
to accept it.
The utility automatically scans the subnet for AX100-Series
storage systems. When this storage-system discovery operation is
complete, the utility lists, by hardware serial number, all
uninitialized and initialized storage systems it discovered. The
hardware serial number is on a label on the rear of the chassis
(see page 39).
If the storage system you are installing was not discovered, verify
the cable connections between the storage system and the
computer running the utility.
5. Enter the item number of the storage system you want to
initialize and press
Enter
.
6. Using the information from the Storage-System Management
Ports
section of the completed storage-system configuration
worksheet, follow the instructions on the screen to change the
storage system’s name, if desired, and to set the following
network parameters for the storage-system 10/100 management
ports:
7. Enter the name you want for the storage system, which cannot
exceed 32 characters.
Storage Processor A - IP
IP address for SP A management port.
Storage Processor B - IP
IP address for SP B management port.
Subnet Mask
Subnet mask associated with the LAN to which the
storage-system management port is connected.
Default Gateway
Default gateway address for the LAN to which the
storage-system management port is connected.
