AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a NetWare Server
27
Installing Additional Disks
Install a Disk Module
1. Make sure an ESD wristband is attached to your wrist and the
storage system (see the precautions on page 23).
2. Align the module with the guides in the slot.
3.
Gently
push the module completely into the slot (Figure 9). To
ensure that the module seats completely, push in on the disk label
as you engage the latch.
Figure 9
Installing a Disk Module
The disk module’s Active light flashes to indicate the disk’s
spin-up sequence.
EMC2812
Label
(Push Here)
Disk
