EMC2 AX100 Series, Руководство пользователя

Страница: 16 / 68

16
AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a NetWare Server
Unpacking the Storage System
Unpacking the Storage System
Read this section if you are installing a new storage system.
1. Unpack the storage system as shown on the shipping carton.
CAUTION
!
The disks in slots marked 0-2 (AX100SC, single-SP storage system)
and 0-3 (AX100, dual-SP system) are preloaded with storage-system
software according to their slot assignment before shipment. Do
not move a preloaded disk from its assigned slot to another slot.
Doing so causes the storage system to function improperly. Remove
a preloaded disk only to replace it.
Figure 1
Location of Disks 0-3
2. Locate and record the serial number of the storage system
(Figure 2).
You need this number later when you initialize the storage
system.
EMC2794a
0 1 2 3