EMBRON Hatteland X Series, Руководство пользователя

Страница: 46 / 134

Physical Connections
46
IND100133-58
Interface Connector (External Tactile Display Controls
-
TDC):
This D-SUB 15P connector (male) provides an interface for User Controls in order to Power On/OFF the unit as well
as full access to the OSD Menu, Brightness, Contrast functions and more. On certain models this connector is already
by factory default occupied and connected.
Secure the Interface cable to the hex spacers provided on the unit and make sure you do not bend any of the pins
inside the connector when connecting.
Note: Cable that connects the TDC unit to the Display unit must under no circumstances be connected or
disconnected while the Display unit is powered on. Failure to do so may result in a damaged TDC or Display Unit
HDMI IN:
Connect your HDMI (male) cable to the HDMI (v2.0) 19P connector (female) of the unit. The HDMI connector has its
own locking mechanism that locks the plug inserted. Make sure the plug “clicks” into place to verify a proper and
secure connection. For additional secure mounting, consider using the provided “ATEN LockPro HDMI/DP Cablelock”.
DisplayPort (DP) IN:
Connect your DP (male) cable to the DisplayPort (v1.2) 20P connector (female) of the unit. The DP has its own locking
mechanism that locks the plug inserted. Make sure the plug “clicks” into place to verify a proper and secure
connection. For additional secure mounting, consider using the provided “ATEN LockPro HDMI/DP Cablelock”.
FW (Firmware) Update:
Intended for on-site possibility to upgrade/service the internal Firmware inside the unit that could fix issues or to
improve functions Upgrading should only be performed by a skilled technician familiar with typical Firmware/Bios
upgrading. Connect a TYPE A USB Cable between this connector and your PC. Port is USB2.0 (<5m).
VGA IN (Analog):
Only available for HW00 models with DVI/VGA signal inputs.
Please review “Hardware Code (HWxx) chapter in this manual for more information.
Connect your VGA cable to the D-SUB 15P connector (female). Secure the VGA cable to the hex spacers provided on
the unit and make sure you do not bend any of the pins inside the connector when connecting. Connect the other end
of the cable to the VGA connector on your equipment and secure it.
DVI-D IN:
Only available for HW00 models with DVI/VGA signal inputs.
Please review “Hardware Code (HWxx) chapter in this manual for more information.
Connect your DVI cable to the DVI-D 24P connector (female). Secure your DVI cable to the hex spacers provided on
the unit and make sure you do not bend any of the pins inside the connector. Connect the other end of the cable to the
DVI connector on your equipment and secure it.