EMBRON Hatteland X Series, Руководство пользователя

Страница: 88 / 134

88
IND100129-183
All specifications are subject to change without prior notice!
Specifications - HD 55T22 MVD-AAx-TOGx
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hattelandtechnology.com for the latest electronic version.
2/2
• W:1360.68 [53.57''] x H :See below x D:831.48 [32.74''] mm [inch]
Height is adjustable from 761.00 [29.96"] to 1061.00 [41.77"] mm [inch]
• Approx. 148.0kg / 325.6lbs (including optional HT C02 computer)
• Approx. 135.0kg / 297.0lbs (without optional HT C02 computer)
• High Quality TFT with LED Backlight Technology
• 55.0 inch viewable image size, Widescreen, Aspect Ratio 16:9
• TFT active-matrix liquid crystal panel, RGB vertical stripe
• MVA (Multi-domain Vertical Alignment) LCD Technology
• Native Resolution : 3840 x 2160 (UHD, 4K)
• Pixel Pitch (RGB) : 0.315 (H) x 0.315 (V) mm
• Response Time : 6.5 ms (typical) (G to G)
• Contrast Ratio : 4000:1 (typical)
• Light Intensity : 450 cd/m² (typical)
• Viewable Angle : +/- 89 deg. (typical) (Up/Down/Left/Right)
• Active Display Area : 1209.6 (H) x 680.4 (V) mm
• Max Colors : 16.7 million
A P P R O V A L S & C E R T I F I C A T E S
Physical Considerations:
TFT Technology:
TFT Characteristics:
These products have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002) IACS E10 EU RO MR
- Mutual Recognition
ClassNK
- Nippon Kaiji Kyokai
CCS - China Classification Society
• Operating : Temperature -15 deg. C to +55 deg. C
• Storage : Temperature -20 deg. C to +60 deg. C
• Humidity : Up to 95% (Operating / Storage)
• IP Rating : Protection: IP66 front - IP22 rear (EN60529)
• Compass Safe Distance : Standard: 500cm - Steering: 230cm
Lifetime Considerations:
Even though the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
On right side - Glass Display Control™ (GDC) IP66:
• Power On/Off (display), On Screen Display Menu, Brightness Control (-/+)
• Hotkeys (left/right), Mode Status Indicators (ECDIS, Service)
• Buzzer (not visible), Light Sensor (not visible)
Under Right Side Table Frame:
• Tilt and Lift buttons
Under Front Side Table Frame:
• Main Power ON/OFF switch (switch for internal Computer and Display)
• Color Calibrated models (ECDIS): HD 55T22 MVD-AA4-TOGP
• Factory Integrated HT C02 range of computers, contact Sales for details.
Environmental Considerations:
User Controls:
Factory Options:
• HDMI 1.4 Input : 2 x 19p HDMI (female) - Max 3840x2160@30Hz
• HDMI 2.0 Input : 1 x 19p HDMI (female) - Max 3840x2160@60Hz
• DP 1.2 Input* : 1 x 20p DisplayPort (female) - Max 3840x2160@60Hz
• SCOM+Touch* : 1 x USB TYPE A Connector (female)
• SCOM RS-422/485 : 1 x 5-pin Terminal Block 3.81 non-is Buzzer
• SCOM Ethernet : 1 x RJ45 Connector
• SCOM RS-232 : 1 x 9p D-SUB (female) non-isolated
• User Interface : 1 x 9p D-SUB (male) - Potentiometer Analog Input,
User Brightness (BRT), I2C and +5VDC & 12VDC OUT
• SW Interface : 1 x USB TYPE A (female) for Firmware Update
• GDCx Interface : 1 x 15p D-SUB (male) for GDC Hardware Comm.
• AC Power IN : 1 x Junction Box enclosure w/Terminal Block
Internal Signal Terminals:
Power Supply:
115&230VAC - 50/60Hz
Power Consumption:
Operating with HT C02 computer : 350W (typ) - 480W (max)
Operating without HT C02 computer : 300W (typ) - 440W (max)
Power Specifications:
Resolutions:
VGA (640 x 350) to UHD (3840 x 2160*)
*
Recommended for optimal picture quality. Review Timing Table in User Manual.
Supported Signals:
• Projected Capacitive Touch Screen (Multitouch, USB interface)
• Optical Bonding Technology
• Transport Case:
L:1500 [59.06''] x W:980 [38.58''] x D:1000 [39.37''] mm - 1.47m ³
• 1 x 5240-15: Fabric Protection Top Cover, Stretch/Washable, Cotton
Factory Default:
• USB2.0 (<5m) : 2 x USB Type A (4-pin) - Under Front Side of Table
Table Stand Signal Terminals:
* If optional HT C02 computer was delivered with Chart & Planning Table, these are
connected by factory default to the internal Computer.
If no optional HT C02 computer was delivered with Chart & Planning Table, the miniDP,
USB Touch and AC Cables are provided to allow connection to alternative computer.
• HD 55CAS SX1-A1 : 1 x Transport Case (Approx 60.0 kg / 132.0lbs)
L:1470.00 [57.87"] x W:930.00 [36.61"] x D:1000.00 [39.37"] mm [inch] - 1.3m³
• HD 55BAS SX1-A1 : 1 x Base Mount Plate (not for permanent mount)
W:806.00 [31.73"] x H:610.00 [24.02"] x D:10.00 [0.39"] mm [inch]
• HD REM SX1-A1 : 1 x External Remote Control, EN60945 Tested
• 5240-15: 1 x Fabric Protection Top Cover, Stretch/Washable, Cotton
Available Accessories:
• Tactor (Rotation Angle Value, X/Y Position, 1 x Button) supported Model
• Active Stylus Pen Supported Model
Prepared for:
Chart & Planning Table Model