EMBRON Hatteland X Series, Руководство пользователя

Страница: 16 / 134

16 Touch screen
IND100110-13
Touch screen products
Touch Screen Drivers
All units with Touch Screens are automatically detected by the Operating System via HID. There is no need to install
additional Third-Party touch screen drivers.
Note: By factory default the Default Touch Enabled Source is set to DisplayPort (DP). Touchscreen is not active if
using HDMI. You may change this behaviour in the OSD menu: “Miscellaneous/Touch PWR” as described in the OSD
Menu chapter in this manual.
Microsoft® Windows® 7 / Microsoft® Windows® 10 IoT
- Please use Windows® Generic HID driver, no specific driver needed to use multi-touch.
Microsoft® Windows® XP - For 32, 43 and 55 inch units:
- Multi-Touch Screen is not supported for this Operating System.
- Alternative Single Touch / Mouse Mode not supported.
Ref: OS End-of-Life: https://www.hatteland-display.com/mails/09_2016_eol.html
If you experience any deviation in the touch input accuracy, consider re-calibrating the touch screen for your system.
Please use the standard Operating System functionality to calibrate.
Example for Microsoft® Windows® 10 IoT:
1.Open Control Panel.
2.Click on Hardware and Sound.
3.Under “Tablet PC Settings,” click the Calibrate the screen for pen or touch input link.
4.Under “Display options,” select the display (if applicable).
5.Click the Calibrate button.
6.Select the Touch input option
Example for Microsoft® Windows® 7:
1: Open Control Panel
2: Open “Tablet PC Settings”
3: Under “Display options,” select your display.
4: Click the Calibrate button and follow instructions
5: To save settings, click “Apply” or “OK” on the “Table PC Settings” window.
Linux
- Please use Linux Generic Touch driver. Use kernel 4.10 or later.