EMBRON Hatteland X Series, Руководство пользователя

Страница: 38 / 134

38
Maintenance Procedures
Installation
IND100078-42
Replacing Main Power Switch or Front USB module (Table Model)
If the Main Power Switch is worn out or the plastic or metal on the USB Module is damaged, please follow this procedure in order
to get access and replace them.
Note: Illustrations below may deviate slightly from written instructions (based on how the unit was delivered/tested prior to actual
installation onboard occurs). All procedures should be performed by a skilled technician that can interpret the physical parts and
correctly identify them on the illustrations below for correct installation).
▼1: First you need to remove the Top Ceiling Panel. Notice
this panel is located just above the front mounted Main Power
Switch and USB connectors.
▼2: Remove 6 screws as indicated to remove the Top Ceiling Panel
to reveal the connectors.
▼3: Remove 4 screws on Top Side Front Cover. ▼4: Location of the Main Power Switch and USB Module.
Main Power Switch
USB Module
▼5: Remove either Main Power Switch (push, click-lock) or the USB Module (remove 2 x M3 Countersunk screws) - depending on
needs and disconnect any connected cables to the item. Replace the faulty item and reverse this procedure to assemble everything
back together. Note that both power switch and USB module has been taken out in the illustration blow.
Main Power Switch
USB Module