EMBRON Hatteland X Series, Руководство пользователя

Страница: 48 / 134

48
IND100064-46
Operation
User Controls
Power ON/OFF:
This symbol and all text will illuminate in red when suitable power is connected and the unit is turned off. When the
unit is on and operating, this symbol will illuminate constantly either in yellow color (signal not recognized/not present
and no image on screen) or green color (signal detected and image on screen). Note: A Main Power switch is also
located under the front size of Table models. See later in manual for details.
Power ON:
To turn the display on, verify that the symbol is illuminated in red (indicates suitable power is connected) and touch the
power symbol and hold until the the symbol changes to green light/yellow light or a image appears on the screen.
Power OFF:
To turn the display off, touch the power symbol and hold until it either illuminates/changes from green/yellow to red or
the image on screen disappears.
USER CONTROLS OVERVIEW
The units are designed using Glass Display Control ™ (GDC) touch technology to allow interactivity adjusting brilliance
(brightness) and control power on / off with the use of illuminated symbols. Note that these symbols are only visible
(backlight illuminated) when suitable power is connected. There are no physical moving knobs, potmeters, wheels
or push buttons available as everything is touch surface controlled by Projected Capacitive technology, that allows a
human finger (including several types of gloves) to control the unit.
OSD Menu
Navigation
Back Forward
Brightness &
Decrease/Increase
ECDIS Status / Indicator
Power On/Off + Status
Action Indicators
Light Sensor
Buzzer
For Console Models
Via External Remote
For Chart & Planning Table Models
Located on the right side
For Wall Mount Models
Located on the right side
For Floor Tilt Models
Located on the right side