EMBRON Hatteland X Series, Руководство пользователя

Страница: 6 / 134

6
IND100131-32
Contents of package
Item Description Illustration
VSD101004-1
1 x DP to DP (DisplayPort 1.2) Signal Cable.
DP 20P Male to DP 20P Male - Length 2.0m
Applicable only for Wall Mount/Console models.
B143B-007J
1 x miniDP to DP (DisplayPort 1.2) Signal Cable.
miniDP 20P Male to DP 20P Male - Length 2.0m
Applicable only for Wall Mount models.
TP52/TC01-1,8M
1 x Power Cable (Black) European Type F “Schuko” to IEC. Length: 1.8m (5.9 ft)
Applicable only for Wall Mount/Console models.
EUR TYPE F
IEC
TP11/TC01-1,8M
1 x Power Cable (Black) US Type B plug to IEC. Length: 1.8m (5.9 ft)
Applicable only for Wall Mount/Console models.
US TYPE B
IEC
FCE17-E2W2SS-2N0
1 x 2-pin DSUB Female DC Power Input internal cable screw terminal
Applicable only for Wall Mount/Console models.
L17DPPK09JSU
1 x DSUB Cover for FCE17-E2W2SS-2N0
Applicable only for Wall Mount/Console models.
VSD100913-1
1 x Touch Screen Cable USB Type A to Type A.
Length Approx 2m.
Applicable only for Wall Mount/Console model.
Test Report
Würth 742 711 31
1 x Ferrite Würth, Ø Cable: 6.0 - 7.5 mm.
This ferrite is required when connecting a RS-232 cable to the SCOM on the unit
(1 x 9p D-SUB, female, non-isolated) connector to be fully compliant with type approvals.
Review installation chapter for more information.
Applicable only for Wall Mount/Console models.
Terminal Block Connector Kit
Terminal Block Connector Kit as follows (may in some cases be already factory mounted):
2 x 5-pin Terminal Block 3.81 for RS-422 / RS-485 / SCOM / Buzzer Module
Refer to “Configuring Housing / Terminal Block Connector” section for usage.
Applicable only for Wall Mount/Console models.
Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list.