EMBRON Hatteland X Series, Руководство пользователя

Страница: 76 / 134

76 User Controls
OSD Menu Functions
IND100064-48
|---2---
Miscellaneous > Key 1 / Key 2
Assign a commonly used OSD menu function to the available touch enabled “Hot Keys” (<) and (>)
which are located on the User Controls. The following functions are available to assign and most of
them have a negative and positive counting logic. All of these functions are described before and
after this segment in the manual.
Settings as follows (for both “Key1” and “Key2”):
“Black Level” = Increase/Decrease Brightness of the TFT panel (not backlight).
Reference in user manual: “Image Settings / Brightness”
“PIP Child Size”
= Increase/Decrease the size of the Picture-In-Picture overlay.
Reference in user manual: “PIP Menu / PIP Child Size”
“Main Source” = Flip up/down through the available signal sources (to full screen) defined as
Main Input.
Reference in user manual: “PIP Menu / Swap Source”
“Second Source”
= Flip up/down through the available signal sources (to PIP/PBP) defined as
Second, Third and Fourth Inputs
Reference in user manual: “PIP Menu / Swap Source”
“PIP Mode” = Flip up/down through the PIP/PBP functions.
Reference in user manual: “PIP Menu / PIP Mode”
“Graphic Scaling”
= Flip up/down through the scaling methods available.
Reference in user manual: “OSD Miscellaneous / Aspect Ratio”
“Swap Source” = Loops through all the sources available defined as Main, Second, Third and
Fourth input.
Reference in user manual: “Input Source Settings”
“Test Pattern”
= Display the internal test image overriding any signal inputs. Both Hot Keys
performs the same action.
Reference in user manual: “Service Settings / Test Pattern”
“OSD Language” = Flip up/down through available languages (real-time changes).
Reference in user manual: “OSD Menu > OSD Language”
“No Function”
= Nothing will be activated when user touches Hot Keys on front glass. Both
Hot Keys performs the same action.
● Note: Default Hot Keys are assigned to “No Function”