Elkron wl31, Руководство по установке и программированию

Страница: 80 / 112

80/112 WL31/WL31TG
8.72 SEND TYPE [93]
Menu > Telephonic Trx - Send type
Authorisation level:
TECHNICIAN
Purpose
This enables you to program the method according to which the alarm event signalling must be sent for each
recorded telephone number. The possible choices are as follows:

Voice : the basic voice message is sent to a private number, followed by a specific and duly pre-recorded
message relating to the event. In cases of more events, the number of phone calls carried out will be equal to
the number of events.

IDP, ADF, S1400, C200b : the data relating to the event is sent to the Reception Centre through a selectable
digital protocol. Given the intrinsic GSM line limits, it is advisable to use the PSTN line for these types of
protocol.

Modem : the data relating to the event is sent, through an ELKRON protocol, to a remote PC equipped with
Fast Link remote management software.

SMS : the personalised SMS message specific to the event is sent to a private number. In cases of more events,
the number of phone calls carried out will be equal to the number of events. It is only possible to send SMSs if
the GSM IMG30 module has been installed
The IDP, ADF and S1400 protocols have a fix code; consequently it is sufficient to select the protocol and the
communicator allocates the relating pre-set code to each event sent.
The C200b is instead a programming code protocol and consequently it is necessary to program a code (defined
by the remote control centre) for each event or for each input.
How to do it :
1. Press the OK key and use the

and

keys to choose the telephone number to be used for sending the
message.
2. Confirm your choice by pressing the OK key.
3. Use the

and

keys to choose the type of telephone send to be used and confirm by pressing the OK key.
SEND TYPE
EVENT Voice message Sms message
Numeric
protocole
Modem
Intrusion
   
Intrusion Over (*)
- -
 
Interference
   
Technological
   
Fire
   
Silent panic

-
 
Emergency

-
 
Total activated -
–
only C200B
–
Sect. 1 Activat. -
  
Sect. 2 Activat. -
  
Sect. 3 Activat. -
  
Sect. 4 Activat. -
  
Total deactivat. -
–
only C200B
–
Sect 1 deactiv. -
  
Sect 2 deactiv. -
  
Sect 3 deactiv. -
  
Sect 4 deactiv. -
  
Maintenance - -
 
Entry exclusion - -
 
Battery low
   
Jamming -
  
Supervision -
  
No network
   
Network return
   
SIM card expiration -

- -

= associable - = non associable
(*)
= if an input is programmed as GONG, the “Intrusion over” event is sent to the control panel also with the system off.
REMARK : for Vocal and SMS sending, the radio damage events (Jamming and Supervision ) are automatically
associated to the general Damage message.