56/112
WL31/WL31TG
8.7 SETTING - EXCLUDE/INCLUDE [30]
Menu > Setting > Setting - Include / Exclude
Authorization level:
MASTER
,
TECHNICIAN, USER
Purpose:
This enables the voluntary exclusion, or a new inclusion, of a system input or detector. The purpose is to avoid a
stimulus of the input or detector, caused when the system is on, starting the alarm. This function can be useful, for
example, to temporarily exclude a damaged detector.
How to do it
:
1. Press
OK
to access the system detectors and Inputs list and use the
and
to scroll up and down this
list. Warning: only the “Excludible” programmed Inputs are displayed.
2. Using the
OK
key, select the detector or input whose status must be modified. The detector status is shown as
“Included” or “Excluded”, depending on the situation.
3. Use the
key to choose the “Exclude” or the “Include” action depending on the situation. When an input or
detector is excluded, the following icon is shown on the display
.
4. Confirm using the
OK
key.
8.8 SETTING - TIME AND DATE [31]
Menu > Setting > Setting - Time and date
Authorization level:
MASTER
,
TECHNICIAN, USER
Purpose:
This enables you to set the current day, month and year on the system. These will then be used by the EVENT
MEMORY. The information relating to the time and date is constantly shown on the display, in the pre-set format
and alternated.
Submenu
Fast code
Time and date - Set time
310
Time and date - Set date
311
8.9 TIME AND DATE - SET TIME [310]
Menu > Setting > Setting - Time and date - Time and date - Set time
Authorization level:
MASTER
,
TECHNICIAN, USER
How to do it:
OK
hhmm
OK
, where
hh = time (in the 24 hours format), mm = minutes.
Examples
: 0735 for 7.35, 1218 for 12.18, 2247 for 22.47.
The event is stored in user memory.
8.10 TIME AND DATE - SET DATE [311]
Menu > Setting > Setting - Time and date - Time and date - Set date
Authorization level:
MASTER
,
TECHNICIAN, USER
How to do it:
OK
ddmmyy
OK
, where dd =day, mm =month, yy = last two figures of the year
Examples
: 020505 for 2/5/2005, 150706 for 15/7/2006, 301106 for 30/11/2006.
The event is stored in user memory.
8.11 SETTING - LANGUAGE [32]
Menu > Setting > Setting - Language
Authorization level:
MASTER
,
TECHNICIAN, USER
Purpose:
This enables you to select the language to be used for the display messages.
Sub-menu
Fast code
Language - Select language
320
