Eaton Rapid Link 5, Руководство пользователя, Страница: 239 / 249

10 Error Messages
10.1 Introduction
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com
235
10 Error Messages
10.1 Introduction
The Rapid Link 5 Modules have several internal monitoring functions.
If deviations from the correct operating state are detected, an error message
is displayed.
10.1.1 Trip Log
The most recent four error messages will be stored in the order in which
they occurred (with the most recent one in the first place).
Fault messages can be read from the monitor-parameter P0-13.
The values will not be deleted if the variable frequency drive is reset to its
default settings!
10.1.2 Acknowledge fault (Reset)
Acknowledge and reset the current error message as follows:
• Switch off the supply voltage.
• Press the STOP button (DX-KEY-OLED).
• Set key switch to OFF/RESET.
10.1.3 Automatic reset
Set the auto reset function using parameters P2-24 and P2-26.
The parameter P2-26 determines the time between start-up attempts if the
Auto Reset function is enabled using parameter P2-24.