Eaton Power Xpert Gateway 200E, Руководство пользователя и инструкция по установке

Страница: 89 / 212

CHAPTER 8 - PXG200E CONFIGURATION WEB PAGE
81 EATON PXG200E User Manual • IM02603001E Rev 5, 11-May-2012 • Firmware Version 5.03:3835
11. The screens illustrated in Figure 81 and Figure 82 contain items that
can be entered by the user and the screen illustrated in Figure 83 are
automatically assigned by the PXG200E. For clarity, these items are
listed separately as
Items Entered By User On This Page on
page 81 , Device Configuration Tabs on page 82 and Items
Automatically Assigned By PXG200E on page 83 .
Items Entered By User On This Page
• Name (Figure 81, A) – Enter the name of the Main as you want it to
appear on PXG200E web pages. Maximum number of characters is
30.
NOTICE: If there is a submaster connected to the INCOM
network, it will appear on the configuration screen every time
you add additional devices to the INCOM network. Unless you
are adding an IQMESII meter point, ignore the submaster
field.
• Address (Hex for INCOM devices; decimal for Modbus RTU or QCPort
devices)
(Figure 81, B) – Enter the address of the trip device or
meter. Each device on the network has a unique address.
• Enable Device (Figure 81, C) - This box must be checked to allow
this device to be polled. If this box is unchecked, the device will no
longer be displayed, trended, logged or otherwise communicated.
• Enable Trending (Figure 81, D) – Click this box to enable trending
for this device. See Trend Viewing on page 136 for details on this
feature.
NOTICE: If you are not configuring Device Configuration Tabs
see Saving the Entries on page 83 to save the entries.
Figure 81
PXG200E_251
A
B
C
D
RETURN