Eaton Power Xpert Gateway 200E, Руководство пользователя и инструкция по установке

Страница: 76 / 212

CHAPTER 8 - PXG200E CONFIGURATION WEB PAGE
EATON PXG200E User Manual • IM02603001E Rev 5, 11-May-2012 • Firmware Version 5.03:3835 68
2. The drop-down menu “Create Which Device” (Figure 6 4, A) appears.
Choose Submaster .
3. Click on the button (Figure 6 4, B) to proceed to Step 5 if you are
satisfied with your selection.
4. Click on the button (Figure 6 4, C) to go back to Step 1 if you wish
to change the selection.
Figure 64
5. If there is more than one Bus in the system, select the Bus to which the
new device will be added
(Figure 6 5, A) .
Figure 65
6. Click on the button (Figure 6 5, B) to proceed to Step 8 if you are
satisfied with your selection.
7. Click on the button (Figure 6 5, C) to go back to Step 1 if you wish
to change the selection.
PXG200E_234
A
C
B
PXG200E_235
A
C B
RETURN