CHAPTER 8 - PXG200E CONFIGURATION WEB PAGE
EATON
PXG200E User Manual • IM02603001E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
58
Adding a New Bus - Step-By-Step
Additional Buses can be added to an existing Main. Buses that do not have a
Main associated with them can also be added to the system.
To add a new Bus to the system, follow these procedures:
1.
Click on the
(Figure 52, A)
in the device list of the PXG200E
configuration web page.
Figure 52
2.
Select “Bus” from the “Create Which Device” drop-down menu
.
3.
Click on the
button
(Figure 53, B)
to proceed to
if you are
satisfied with your selection.
4.
Click on the
button
(Figure 53, C)
if you wish
to change the selection.
Figure 53
PXG200E_222
A
PXG200E_223
A
B
C
RETURN
