Eaton Power Xpert Gateway 200E, Руководство пользователя и инструкция по установке

Страница: 51 / 212

CHAPTER 8 - PXG200E CONFIGURATION WEB PAGE
43 EATON PXG200E User Manual • IM02603001E Rev 5, 11-May-2012 • Firmware Version 5.03:3835
Automatic Settings
After you enter the routed network number, save it and click the refresh link,
the automatic settings that depend on the routed network number are filled
in
(Figure 34, A) .
Figure 34
Editing BACnet/ID Settings
1. Base ID for Auto-Assign - (Figure 35, A) This value is automatically
generated during Initial Setup on page 42 . Edit this value if necessary
for a specific application.
2. Auto-Assign Gateway ID - (Figure 35, B) If there is a check-mark in this
box the Device ID (object-identifier) (Figure 35, C) cannot be modified.
If the Auto-Assign Gateway ID box (Figure 35, B) is un-checked, you
can edit the value in Device ID (object-identifier) (Figure 35, C) .
3. Device Object-Name - (Figure 35, D) This value is automatically
generated by the PXG200E, it must be unique within your network. Edit
this value if necessary for a specific application.
4. BACnet/IP MAC Address - (Figure 35, E) This value is automatically
generated by the PXG200E and cannot be modified.
Figure 35
PXG200E_215
A
A
PXG200E_216
A
B
C
D
E
RETURN