Eaton Power Xpert Gateway 200E, Руководство пользователя и инструкция по установке

Страница: 88 / 212

CHAPTER 8 - PXG200E CONFIGURATION WEB PAGE
EATON PXG200E User Manual • IM02603001E Rev 5, 11-May-2012 • Firmware Version 5.03:3835 80
5. If there is more than one Bus in the system, select the Bus to which the
new device will be added
(Figure 79, A) .
Figure 79
6. Click on the button (Figure 79, B) to proceed to Step 8 if you are
satisfied with your selection.
7. Click on the button (Figure 79, C) to go back to Step 1 if you wish
to change the selection.
8. Select the type of device from the “What is the Device Type” drop-down
menu
(Figure 80, A) . Note that the list of Pulse Counter devices that are
available is presented.
9. Click on the button (Figure 80, B) to proceed to Step 11 if you are
satisfied with your selection.
10. Click on the button (Figure 80, C) to go back to Step 1 if you wish
to change the selection.
Figure 80
PXG200E_249
A
C
B
PXG200E_250
A
B C
RETURN