CHAPTER 9 - DEVICE CONFIGURATION TABS
EATON
PXG200E User Manual • IM02603001E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
118
4.
Enter the
.
You can assign a level of priority for each parameter. There are five
levels:
•
Critical
•
Major
•
Normal
•
Minor
•
Cautionary
•
Event Only
Critical, major, normal, minor or cautionary priorities are considered
alarm conditions. That means when the trigger conditions you have
selected for the parameter are met you must take an action to clear the
cause of the alarm. After you have cleared the cause of the alarm the
report for the condition for the parameter will change from “Condition
Present” to “Condition Cleared.”
If the priority is set as “Event Only” the condition of the parameter is
automatically reported as “Condition Cleared.” No user action is needed
to change the condition reported for the parameter.
NOTICE: You cannot close an event until it is reported as
“Condition Cleared.” See
PXG200E Home Web Page Events on
for additional details on how events are reported.
5.
Select another parameter and repeat
. Repeat
as many times as necessary to enter all of the parameters you wish.
6.
Click another tab to continue customizing the parameters for the device.
7.
If you have completed customizing the parameters go to
.
Figure 125
PXG200E_293
A
RETURN
