Dräger Infinity Delta Скачать руководство пользователя страница 60

Страница: 60 / 614

2-10

ELTA

XL/K

APPA

VF8

2 M

ONITOR

ETUP

Saving Setups

Follow these procedures to save setups you have configured and named.

Save Setup

CAUTION:

Save

setups with care;

Saving a setup

overwrites an

existing setup.

NOTES

• A

Save Setup

function is

also available on the

Independent Surgical

Display (see page 28-20).

Independent Surgical

Display configuration does

not affect monitor setups.

• You can save a setup on a

monitor that is not

connected to the network

only if you have defined the

setup as

Default

on the

Unit Manager menu under

Rename Setups

. All other

setup options are ghosted.

1) Open the Unit Manager menu (see page

2-9).

2) Click on

Save/Restore

3) Click on

Save Setup

4) Click on the name of the setup you wish to

save. The monitor saves the setup with its

new configuration. A tone indicates the

monitor has successfully saved the setup.

Restoring Setups

Follow these procedures to restore setups you have configured, named, and saved.

Restore Setup

CAUTION

: Restore

setups with care;

Restoring a setup

overwrites an

existing setup.

NOTES:

• You can access

Restore

Setups

quickly as follows:

•

1) Press the

Menu

fixed

key.

2) Click on

Restore

Setups

3) Follow Steps 4-6 at

right.

•

Save Setup

and

Restore

Setup

selections are

also available on the

Independent Surgical

Display (see page 28-20).

The configuration of the

Independent Surgical

Display (ISD) Save or

Restore menu does not

affect monitor setups.

• If a monitor is not

connected to a network,

you cannot restore user-

defined setups.

• You can also restore

setups from the Main

menu.

1) Open the Unit Manager menu (see page

2-9)

2) Click on

Save/Restore

3) Click on

Restore Setup

4) Click on the name of the setup you wish to

restore.

5) Select the type of setting you wish to

restore:

•

Monitor Settings

Only

to restore settings

configured on the Monitor Setup menu,

•

Patient and Monitor Settings

to restore

monitor settings and settings configured on

the Patient Setup menu.

6) The monitor restores the setup and

returns to the Restore Setups menu

; or

Indicates which parameters will be

removed to make room for restored setup.

7) Click on

New Setup

to remove the

indicated parameter(s) and restore the

selected setup, or

Cancel

to return to the

main screen.

Setups Management

Menu function/item Description

Reference/Procedures

Содержание Infinity Delta







































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Infinity Delta

Отзывы:

Бренды по названию

Популярные бренды

Dräger Infinity Delta, Инструкция по эксплуатации

Результаты поиска

Содержание Infinity Delta

Отзывы:

Бренды по названию

Популярные бренды