Dräger Infinity Delta, Инструкция по эксплуатации

Страница: 114 / 614

5-12 D
ELTA
/D
ELTA
XL/K
APPA
VF8
5 A
LARMS
Modifying Alarm Functions
1. Access the
Alarm Limits
table (see page 5-6).
2. Scroll to the parameter whose alarm functions you wish to configure and
click.
3. Scroll to the alarm function you wish to modify (the first column, Alarms , is
highlighted when you first click on the parameter).
4. Choose the new setting, and click to confirm your selection.
5. Repeat steps 2 - 4 for each change.
STVM/STVCM 0 to 45 mm (0 to 4.5 mV) See “ST Alarms Table” on page 10-10.
TOF-Cnt 0 to 4 Off Low 0
High 4
TruST Parameters (see: ST TruST Leads)
Temperature
(Ta/b, T2a/b,
T3a/b)
-5.0 to 50.0
o
C (23.0 to 122.0
o
F) Off Low 34.0
o
C (93.2
o
F)
High 39.0
o
C (102.2
o
F)
Δ
T/
Δ
T2/
Δ
T3 -32.0 to 35.0
o
C (-25.6 to 95.0
o
F) Off Low 0.0
o
C (32.0
o
F)
High 2.0
o
C (35.6
o
F)
tpCO
2
/pCO
2
2* 10 to 150 mmHg (1.3 to 20.0 kPa) On Low 4.0 mmHg (0.5 kPa)
High 6.7 mmHg (0.9 kPa)
tpO
2
/tpO
2
* 10 to 300 mmHg (1.3 to 40.0 kPa) On Low 6.7 mmHg (0.9 kPa)
High 10.7 mmHg (1.4 kPa)
PCCO 0.50 to 25.00 L/min Off Low 5.50 L/min
High 9.50 L/min
PCCI 0.75 to 15.00 L/min Off Low 3.00 L/min
High 8.00 L/min
NOTE:
Turning a parameter’s alarm function on allows alarms to be triggered for that
parameter. It is not a prerequisite for a parameter to be on display or to be
connected for it to produce an alarm.
Turning a parameter’s alarm function off prevents the parameter from
triggering an alarm.
Parameter Predefined Alarm Range
Default
State
Default Alarm
Setting / Alarm Priority