WRM-10P S2 USER’S MANUAL REV 1.0
68
d.
The following screen will be displayed:
1.
ERASE SINGLE RECORD
Press the
[1]
key (
ERASE SINGLE RECORD
) if you would like to erase a single test
record from the USB Flash drive. The following screen will be displayed:
Type the test record number to be erased and press the
[ENTER]
key.
NOTES
•
You can press the
[STOP]
key to cancel the process.
•
If you do not know the record number, you can first print a test
record directory using the instructions in section 3.11.8.
The test record will be erased, and the following confirmation screen will be
displayed:
Press any key to return to the "START-UP" menu.
2.
ERASE ALL RECORDS
Press the
[2]
key (
ERASE ALL RECORDS
) if you would like to erase all of the test
records from the USB Flash drive. The following screen will be displayed:
THUMB DRIVE REC_001
ERASED!
ERASE THUMB DRIVE
REC_ _
ERASE RECORD
1.ERASE SINGLE RECORD
2.ERASE ALL RECORDS
Содержание Vanguard Instruments WRM-10P S2
