REV 1.0
WRM-10P S2 USER’S MANUAL
15
3.5
Toggling the Calibration Notification Feature
The WRM-10P S2 offers a convenient feature that can print the unit's calibration due date at
the bottom of the test reports printed on the unit's thermal printer. Follow the steps below to
toggle this feature:
a.
Start from the "START-UP" menu:
Press the
[4]
key (
SETUP
).
b.
The following screen will be displayed:
Press the
[4]
key (
CAL PRINT ON/OFF
).
c.
The following screen will be displayed:
Press the
[1]
key (
ENABLE
) to enable or the
[2]
key (
DISABLE
) to disable this feature.
d.
The following screen will be displayed (enabled option shown):
Press any key to return to the "START-UP" menu.
CAL DATE PRINTING
ENABLED.
CAL DATE PRINTING:
1.ENABLE
2.DISABLE
1.ENTER SHOT ID
2.SET TIME
3.SET LANGUAGE
4.CAL PRINT ON/OFF
1.RUN TEST
2.TEST RECORDS
3.DIAGNOSTICS
4.SETUP
08/30/17
08:51:56
Содержание Vanguard Instruments WRM-10P S2
