WRM-10P S2 USER’S MANUAL REV 1.0
50
3.11.2. Restoring a Test Record From a USB Flash Drive
Follow the steps below to restore a test record from a USB Flash drive to the WRM's working
memory:
a.
Make sure the USB Flash drive containing the test records is inserted in the WRM's "USB
MEM" port, and then start from the "START-UP" menu:
Press the
[2]
key (
TEST RECORDS
).
b.
The following screen will be displayed:
Press the
[4]
key (
RESTORE RECORD
).
c.
The following screen will be displayed:
Press the
[2]
key (
THUMB DRIVE
).
d.
The following screen will be displayed:
Type the record number using the keypad, and then press the
[ENTER]
key.
RESTORE THUMB DRIVE
REC_ _
1.INTERNAL STORAGE
2.THUMB DRIVE
1.PRINT RECORD
2.DISPLAY RECORD
3.SAVE RECORD
4.RESTORE RECORD
5.RECORD DIRECTORY
6.ERASE RECORD
7.COPY TO THUMB DRIVE
1.RUN TEST
2.TEST RECORDS
3.DIAGNOSTICS
4.SETUP
Содержание Vanguard Instruments WRM-10P S2
