WRM-10P S2 USER’S MANUAL REV 1.0
62
3.11.8. Printing a Directory of Test Records Stored in a USB Flash Drive
Follow the steps below to print a directory of all the test records stored in a connected USB
Flash drive:
a.
Insert the USB Flash drive containing the test records in the WRM's "USB MEM" port,
and then start from the "START-UP" menu:
Press the
[2]
key (
TEST RECORDS
).
b.
The following screen will be displayed:
Press the
[5]
key (
RECORD DIRECTORY
).
c.
The following screen will be displayed:
Press the
[2]
key (
THUMB DRIVE DIR
). The directory listing will be printed on the
thermal printer, and you will be returned to the "START-UP" menu. A sample directory
listing printout is shown in Figure 13.
1.INTERNAL DIRECTORY
2.THUMB DRIVE DIR
1.PRINT RECORD
2.DISPLAY RECORD
3.SAVE RECORD
4.RESTORE RECORD
5.RECORD DIRECTORY
6.ERASE RECORD
7.COPY TO THUMB DRIVE
1.RUN TEST
2.TEST RECORDS
3.DIAGNOSTICS
4.SETUP
Содержание Vanguard Instruments WRM-10P S2
