WRM-10P S2 USER’S MANUAL REV 1.0
54
3.11.4. Printing a Test Record
Once you perform a test or restore a test record from the unit's internal memory or USB Flash
drive, you will be presented the option to print the test record. If you do not print the test
record immediately after performing a test or restoring a test record, you can do so later by
following the steps below:
a.
Start from the “START-UP” menu:
Press the
[2]
key (
TEST RECORDS
).
b.
The following screen will be displayed:
Press the
[1]
key (
PRINT RECORD
). The test record in the working memory will be
printed on the unit's built-in thermal printer, and you will be returned to the "START-
UP" menu.
1.PRINT RECORD
2.DISPLAY RECORD
3.SAVE RECORD
4.RESTORE RECORD
5.RECORD DIRECTORY
6.ERASE RECORD
7.COPY TO THUMB DRIVE
1.RUN TEST
2.TEST RECORDS
3.DIAGNOSTICS
4.SETUP
Содержание Vanguard Instruments WRM-10P S2
