WRM-10P S2 USER’S MANUAL REV 1.0
46
3.11 Working with Test Records
3.11.1. Restoring a Test Record from the Unit's Internal Flash EEPROM
Follow the steps below to restore a test record from the WRM's internal Flash EEPROM to the
unit's working memory so that it can be reviewed or printed:
a.
Start from the "START-UP" menu:
Press the
[2]
key (
TEST RECORDS
).
b.
The following screen will be displayed:
NOTE
Option 7 (
COPY TO THUMB DRIVE
) will be displayed only if a USB Flash drive is
inserted in the WRM-10P S2's USB Flash drive port.
Press the
[4]
key (
RESTORE RECORD
).
1.PRINT RECORD
2.DISPLAY RECORD
3.SAVE RECORD
4.RESTORE RECORD
5.RECORD DIRECTORY
6.ERASE RECORD
7.COPY TO THUMB DRIVE
1.RUN TEST
2.TEST RECORDS
3.DIAGNOSTICS
4.SETUP
Содержание Vanguard Instruments WRM-10P S2
