WRM-10P S2 USER’S MANUAL REV 1.0
42
The following screen will be displayed if no transient is detected:
The following screen will be displayed if a switch break is detected:
Press any key to continue.
h.
The following screen will be displayed:
Press the
[1]
key (
YES
) to print the test results. The test results will be printed, and you
will be returned to the “START-UP” menu. A typical voltage regulator test report is
shown in Figure 11.
Press the
[2]
key (
NO
) if you do not want to print the test results. You will be returned
to the “START-UP” menu.
PRINT TEST RESULTS?
1. YES
2. NO
TRANSIENT DETECTED
NO TRANSIENT
DETECTED!
Содержание Vanguard Instruments WRM-10P S2
