WRM-10P S2 USER’S MANUAL REV 1.0
52
3.11.3. Viewing a Test Record
The WRM-10P S2's temporary working memory always contains the test results from either the
last test that was performed or the last test that was restored from either the unit's internal
memory or from a USB Flash drive. You can view the data from the unit's working memory by
following the steps below:
a.
Start from the “START-UP” menu:
Press the
[2]
key (
TEST RECORDS
).
b.
The following screen will be displayed:
NOTE
Option 7 (
COPY TO THUMB DRIVE
) will be displayed only if a USB Flash drive is
inserted in the WRM-10P S2's USB Flash drive port.
Press the
[2]
key (
DISPLAY RECORD
).
c.
The following screen will be displayed, showing the test record's header data:
09/20/17 15:18
NUMBER OF TESTS: 3
V1 & V2 TEST
CMP:
STA:
CKT:
MFR:
1.PRINT RECORD
2.DISPLAY RECORD
3.SAVE RECORD
4.RESTORE RECORD
5.RECORD DIRECTORY
6.ERASE RECORD
7.COPY TO THUMB DRIVE
1.RUN TEST
2.TEST RECORDS
3.DIAGNOSTICS
4.SETUP
Содержание Vanguard Instruments WRM-10P S2
