REV 1.0
WRM-10P S2 USER’S MANUAL
21
k.
The following screen will be displayed:
Press the
[1]
key (
YES
) to save the last reading that was taken, or press the
[2]
key (
NO
)
to discard the last reading.
For this example, we will press the
[1]
key for (
YES
).
l.
The following screen will be displayed:
Press any key to continue.
m.
The following screen will be displayed.
Press the
[2]
key (
NO
).
n.
The following screen will be displayed:
Press the
[1]
key (
YES
) to print the test results on the built-in thermal printer.
A typical V1 test report printout is shown in Figure 6.
PRINT RECORD?
1. YES
2. NO
RUN TEST AGAIN?
1. YES
2. NO
==> TEST 3 SAVED <==
SAVE LAST READING?
1. YES
2. NO
Содержание Vanguard Instruments WRM-10P S2
