REV 1.0
WRM-10P S2 USER’S MANUAL
47
c.
The following screen will be displayed:
NOTE
If you have a USB Flash drive inserted in the WRM’s “USB MEM” port, the
following screen will be displayed instead of the above screen:
Press the
[1]
key (
INTERNAL STORAGE
).
The following screen will be displayed:
Continue with the steps below.
1.
ENTER REC NUMBER
If you know the record number that you would like to restore, press the
[1]
key.
The following screen will be displayed:
Type the record number using the keypad and then press the
[ENTER]
key.
Continue to step d.
RESTORE SHOT NUM: _
RESTORE RECORD
1.ENTER REC NUMBER
2.SCROLL TO SELECT
RESTORE RECORD
1.ENTER REC NUMBER
2.SCROLL TO SELECT
1.INTERNAL STORAGE
2.THUMB DRIVE
Содержание Vanguard Instruments WRM-10P S2
