WRM-10P S2 USER’S MANUAL REV 1.0
48
2.
SCROLL TO SELECT
Press the
[2]
key (
SCROLL TO SELECT
) if you would like to scroll through a
directory of the stored test records. The following screen will be displayed:
Press the
[
]
or
[
]
key to display the next or previous test record,
respectively. The test record's header information will be displayed as shown:
Continue to press the
[
]
or
[
]
key until you have located the test record you
would like to restore, and then press then
[ENTER]
key.
Continue to step d.
d.
The following screen will be displayed:
1.
DISPLAY TEST DATA
Press the
[1]
key (
DISPLAY TEST DATA
) to view the restored test record's data on
the unit's LCD screen. The following screen will be displayed, showing the test
record's header data:
09/20/17 15:18
NUMBER OF TESTS: 3
V1 & V2 TEST
CMP:
STA:
CKT:
MFR:
SHOT DIRECTORY
"UP" TO SCROLL FWD
"DOWN" TO SCROLL RVS
"ENTER" TO SELECT
09/20/17 15:18
NUMBER OF TESTS: 3
V1 & V2 TEST
CMP:
STA:
CKT:
MFR:
RECORD 001 RESTORED!
1.DISPLAY TEST DATA
2.PRINT TEST DATA
Содержание Vanguard Instruments WRM-10P S2
