REV 1.0
WRM-10P S2 USER’S MANUAL
57
3.11.6. Copying Test Records to a USB Flash Drive
Follow the steps below to copy one or all test records from the unit's internal memory to a
connected USB Flash drive:
a.
Make sure a USB Flash drive is connected to the unit's "USB MEM" port, and then start
from the "START-UP" menu:
Press the
[2]
key (
TEST RECORDS
).
b.
The following screen will be displayed:
Press the
[7]
key (
COPY TO THUMB DRIVE
).
c.
The following screen will be displayed:
1.
COPY SINGLE RECORD
Press the
[1]
key (
COPY SINGLE RECORD
) if you would like to copy a single test
record to the USB Flash drive. The following screen will be displayed:
ENTER RECORD NUMBER
TO COPY TO THUMB DRV
NUMBER: _
COPY REC TO THUMB DRV
1.COPY SINGLE RECORD
2.COPY ALL RECORDS
1.PRINT RECORD
2.DISPLAY RECORD
3.SAVE RECORD
4.RESTORE RECORD
5.RECORD DIRECTORY
6.ERASE RECORD
7.COPY TO THUMB DRIVE
1.RUN TEST
2.TEST RECORDS
3.DIAGNOSTICS
4.SETUP
Содержание Vanguard Instruments WRM-10P S2
